Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 10
Part: Wheel

Today, discover the necessary guide to remove and replace the rear wheel or tyre of the Yamaha MT-10 motorcycle by following these simple and quick steps. First, place your motorcycle on a stand and lift the rear wheel off the ground using the appropriate stand; then use a socket spanner with an extension to undo the central wheel bolt, as shown in the video. At this point, disconnect the drive chain and replace the tyre if necessary; then refit the wheel, finally adjusting the chain!

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Yamaha MT-10
How to Replace the Air Filter on the Yamaha MT-10
Mt 10 This guide provides instructions on how to remove and replace the engine air filter on the Yamaha MT-10. First, place your bike on a stand and begin …
How to replace the front headlight of the Yamaha MT-10
How to replace the front headlight of the Yamaha MT-10
Mt 10 This guide briefly outlines the steps to remove and replace the front headlight of the Yamaha MT-10 motorcycle. First, place the motorcycle on a stan…
How to replace the rear brake pads of the Yamaha MT-10
How to replace the rear brake pads of the Yamaha MT-10
Mt 10 The instructions illustrated in this guide will allow us to disassemble and replace the rear brake pads of the Yamaha MT-10. First, we put the motorc…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos