Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Mt 10
Part: Air filter

This guide provides instructions on how to remove and replace the engine air filter on the Yamaha MT-10. First, place your bike on a stand and begin by removing the fuel tank; unscrew the fastening screws on the sides and disconnect the electrical connector underneath, as shown in the video. Now, remove the cover of the filter box, replacing the cartridge with a new one; install the new air filter and reassemble everything!

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Mt 10 In this tutorial, learn how to change the engine oil in the Yamaha MT-10, a very simple and quick operation. First, ensure the engine is sufficiently…
Mt 10 This brief guide illustrates how to perform routine maintenance by changing the engine oil and oil filter on a Yamaha MT-10. First, place the bike on…
Mt 10 In this tutorial, you will see how to change the engine oil in a Yamaha MT-10, a very simple and quick operation. First, ensure that the engine is su…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos