|
Do it yourself
| |||
| ||||
Model: Yamaha Mt 125
Follow these steps to remove and replace the front brake pads on the Yamaha MT-125. First, place the motorcycle on a stand and begin unscrewing the bolts securing the front brake caliper to remove it from the disc. Next, remove the brake pads inside by pressing the piston to retract it, as shown in the video. Clean the caliper of any residual dirt, then install the new high-quality pads; reassemble the braking system!
Updated on 5 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Mt 125
In this tutorial, we will see how to change the engine oil in a Yamaha MT-125, a very simple and quick operation. First, wait until the engine is coo…
Mt 125
This guide provides instructions on how to remove and replace the front headlight of the Yamaha MT 125 motorcycle. First, place your motorcycle on a …
Mt 125
This guide shows how to remove and replace the engine air filter on a Yamaha MT 125. First, place your bike on a stand and start by removing the ride…
|
How to Remove the Final Drive from a BMW R 1200 GS?
To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
