Do it yourself
| ||||
|
Model: Yamaha Xmax 125
Let's find out today the procedure and the steps that will allow us to disassemble and replace the thermostat of the cooling circuit of the Yamaha Xmax 125 scooter. First of all, we put our scooter on the central stand and begin to lift the saddle and disassemble the entire compartment under the saddle by unscrewing the fixing screws; then let's disassemble and remove our thermostat, by unscrewing the two fixing screws, as shown in the video. At this point we install the new original thermostat, subsequently checking that the coolant is present and on the maximum level notch!
Posted on 6 May 2023 by ScegliAuto
|
How do you replace the front headlight of the Husqvarna 701?The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight, between the front wheel fork and the plastic panel. Once all the screws are loosened, it will be possible to remove the plastic front cover to which the headlight, containing the bulbs, is attached. It will be necessary to disconnect the connector and remove the old bulb from its housing. Then it will be possible to insert the new bulb into its proper seat and connect the connector. Finally, it will be necessary to reassemble the headlight assembly and secure the fairing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |