Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This tutorial shows how to replace the headlight bulb in a Yamaha XVS 650, a very simple and quick operation. First, ensure the key is not inserted for safety. Then, go to the front of the headlight, locate the indicated screw, and unscrew it with a cross-head screwdriver. Next, grasp the headlamp, pull it out, and separate it from the base. At this point, disconnect the power connector, remove the rubber cap, and unclip the metal clip. To install the replacement and reassemble everything, simply follow the reverse procedure.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Yamaha XVS 650 Drag Star?
How to Change the Engine Oil in the Yamaha XVS 650 Drag Star?
Xvs 650 In this tutorial, you will see how to change the engine oil in the Yamaha XVS 650 Drag Star, a very simple and quick operation. First, wait until the…
How to Replace the Exhaust on a Yamaha XVS 650?
How to Replace the Exhaust on a Yamaha XVS 650?
Xvs 650 To replace the exhaust on a Yamaha XVS 650, loosen the screws that secure the exhaust to its housing on the right side of the bike: once these are lo…
How to Replace the Battery on a Yamaha XVS 650?
How to Replace the Battery on a Yamaha XVS 650?
Xvs 650 To replace the battery on a Yamaha XVS 650, loosen the screws securing the cover located on the right side of the bike, just beneath the seat. Once t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos