Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide shows how to remove and replace the headlight bulb on the Yamaha MT-03 motorcycle, following the instructions below. First, place your motorcycle on the stand and start unscrewing the fixing screws of the front light; once removed, take off the bulb protection cap, disconnect the electrical connector, and unclip the metal spring to remove the bulb, as shown in the video. Now install the new bulb, of the correct type and with the same fitting; reconnect it and reassemble everything!

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb in the Yamaha MT-03?
How to replace the headlight bulb in the Yamaha MT-03?
Mt 03 In this tutorial we can see how to replace the headlight bulb in the Yamaha MT-03, an extremely simple and quick operation. First of all, make sure t…
How to Replace the Front Brake Pads on the Yamaha MT-03
How to Replace the Front Brake Pads on the Yamaha MT-03
Mt 03 Today's guide will help you discover the steps to remove and replace the front brake pads on the Yamaha MT-03 motorcycle. First, place your bike on a…
How to replace the air filter on the Yamaha MT-03
How to replace the air filter on the Yamaha MT-03
Mt 03 Here are the main instructions for removing and replacing the engine air filter on the Yamaha MT-03, following these simple steps. First, place your …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos