Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Fuses Located on a Yamaha FZ6?

Model: Yamaha Fz6
Part: Fuse box

Video tutorial

In this video, you can see where the fuses are located on the Yamaha FZ6, useful if you need to check the fuse of a malfunctioning device. As shown, the fuse box is positioned beneath the right side fairing.

To access it, first lift the rider's seat, then unscrew the indicated screw using a T25 Torx screwdriver. Once the panel is removed and the plastic door is opened, you will have access to the motorcycle's fuses, which can be replaced simply by pulling them out with pliers.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

Yamaha FZ6 fuse schema and positioning
Yamaha FZ6 fuse schema and positioning
Fz6 These short and simple instructions will show us how to access the fuse box of the Yamaha FZ6 motorcycle, as well as the FZ6 Fazer. First, we put the…
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Fz6 In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…
How to Replace the Rear Brake Pads on Yamaha FZ6
How to Replace the Rear Brake Pads on Yamaha FZ6
Fz6 To replace the rear brake pads on the Yamaha FZ6, first loosen the screws securing the brake caliper corresponding to the disc: once these screws are…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos