Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Vino
Part: Brake pads

This tutorial shows how to replace the front brake pads on a Yamaha Vino 125 scooter, a simple and quick operation. First, open the brake fluid reservoir. Then, using a 12mm socket, unscrew the three bolts securing the caliper. Separate the caliper from the fork, then remove the block containing the pads. Clean any dirt residue, position the new parts, and follow the reverse procedure to reassemble everything. Finally, check the fluid level and top it up if necessary.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Yamaha Vino 125
How to Replace the Front Brake Pads on a Yamaha Vino 125
Vino Today's instructions will show you how to disassemble and replace the front brake pads on a Yamaha Vino 125. First, place your scooter on the centre …
How to replace the spark plug in the Yamaha Vino 125 scooter?
How to replace the spark plug in the Yamaha Vino 125 scooter?
Vino In this tutorial, we can see how to replace the spark plug in the Yamaha Vino 125 scooter, an extremely simple and quick operation. First of all, mak…
How to Replace the Battery in a Yamaha Vino 125 Scooter?
How to Replace the Battery in a Yamaha Vino 125 Scooter?
Vino In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos