Do it yourself
| ||||
|
Model: Yamaha Vino
Today's instructions will show us how to disassemble and replace the front brake pads of the Yamaha Vino 125. First, we put our scooter on the center stand and begin to disassemble and remove the front brake caliper. To do this, we unscrew the fixing screws, applying pressure on the caliper piston to retract it, as shown in the video. At this point, we remove the old brake pads, replacing them with the new original ones. We insert them in the correct direction and reassemble the front brake caliper, properly tightening the fixing screws!
Posted on 17 November 2023 by ScegliAuto
|
How do you replace the front headlight of the Husqvarna 701?The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight, between the front wheel fork and the plastic panel. Once all the screws are loosened, it will be possible to remove the plastic front cover to which the headlight, containing the bulbs, is attached. It will be necessary to disconnect the connector and remove the old bulb from its housing. Then it will be possible to insert the new bulb into its proper seat and connect the connector. Finally, it will be necessary to reassemble the headlight assembly and secure the fairing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |