Do it yourself
| ||||
|
Model: Yamaha Xmax 300
The replacement of the engine oil on the Yamaha Xmax 300 is done by loosening the drain plug of the tank, which is located on the lower left side of the motorcycle, next to the kickstand. By unscrewing the plug, it will be possible to drain all the used oil into a properly positioned container. Once the oil has completely drained, the plug should be closed and the screws securing the casing containing the oil filter, which is located immediately above, should be loosened. Once the oil filter has also been replaced, it will be possible to top up the oil through the vent located above the drain.
Posted on 5 November 2023 by ScegliAuto
|
Changing the gearbox oil of the Aprilia Rx 50In this video tutorial we will see how to change the transmission oil of the Aprilia Rx 50 2-stroke enduro motorcycle, following these simple and quick steps. First of all, we put our motorcycle on the stand and begin to unscrew the oil vent bolt that we find under the engine, letting it drain into a container for about ten minutes; after which we unscrew the screws of the oil filter cover, replacing the cartridge with the new one. At this point we unscrew the gear oil filler screw, top up and finally check the transmission oil level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |