Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see how to replace the front headlamp bulb on a Yamaha FZ16, a very simple and quick operation. First, ensure the key is not inserted, then position yourself in front of the motorcycle, unscrew the four side bolts of the headlamp, and remove the two fairings. Next, unscrew the additional fixing bolts, separate the headlamp from the frame, and disconnect the power connector. At this point, simply remove the large rubber cap, unclip the metal clip, and extract the old bulb. To fit the replacement, just follow the reverse procedure.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the front headlight bulb on a Yamaha MT-07
Replacing the front headlight bulb on a Yamaha MT-07
Mt 07 In today's tutorial video, you will learn how to remove and replace the front headlight bulb on a Yamaha MT-07. First, unscrew the headlight mounting…
How to Replace the Headlight Bulb on a Yamaha FZ-07
How to Replace the Headlight Bulb on a Yamaha FZ-07
Fz 07 To replace the headlight bulb on a Yamaha FZ-07, loosen the four screws securing the front headlight to detach it from its housing. After removing th…
How to Replace the Headlight Bulb on a Yamaha Super Ténéré?
How to Replace the Headlight Bulb on a Yamaha Super Ténéré?
Super Tenere To replace the headlight bulb on the Yamaha Super Ténéré, first remove the circular protective cover from the inside of the headlamp. This cover is a…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos