Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this new mini guide for all Yamaha R3 owners, you will discover how to correctly perform the manual reset of the oil light. First, insert the key and turn on the central dashboard. Next, press the "Object" button multiple times until you see the "oil" message on the dashboard display. At this point, press and hold the "Reset" button for a few seconds and release it as soon as the light disappears from the display. Once done, the reset is successfully completed, and you can turn off the dashboard or start your ride.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil of a Yamaha R3?
How to change the engine oil of a Yamaha R3?
R3 To change the engine oil of a Yamaha R3, start by ensuring that the engine is slightly warm, which will make the oil more fluid. Position the motorcy…
How to Set the Time on the Yamaha R3
How to Set the Time on the Yamaha R3
R3 To change the time displayed on the central dashboard of your Yamaha R3, follow these simple steps outlined in this mini guide. First, position the m…
Replacing the Front Headlamp Bulb on Yamaha R3
Replacing the Front Headlamp Bulb on Yamaha R3
R3 Remove the small round cover located behind the front headlamp, accessing it from the handlebar area, as shown in the video. At this point, you can s…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos