Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, let's discover the steps that will allow you to remove and replace the air filter of the engine on the Yamaha Xmax 125 scooter. First, place the scooter on the centre stand and start unscrewing all the fixing screws of the air filter box, which are found on the sides; then remove the plastic cover, as shown in the video. At this point, remove and replace the filter cartridge with a new one; insert the filter in the correct orientation and reassemble the cover of the air filter box, tightening all the side screws!

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Air Filter on a Yamaha Xmax 125
Removing the Air Filter on a Yamaha Xmax 125
Xmax 125 How do you remove the air filter leading to the engine on a Yamaha Xmax 125? Follow this guide to proceed with the replacement or cleaning. Position …
How to Replace the Drive Belt on a Yamaha XMAX 125 Scooter?
How to Replace the Drive Belt on a Yamaha XMAX 125 Scooter?
Xmax 125 In this tutorial, you will learn how to replace the drive belt on a Yamaha XMAX 125 scooter, a relatively simple task. First, wait for the engine to …
How to Replace the Battery in the Yamaha Xmax 125
How to Replace the Battery in the Yamaha Xmax 125
Xmax 125 The instructions in this guide will show you how to remove and replace the battery of the Yamaha Xmax 125 scooter. First, place the scooter on its st…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos