Do it yourself
Frequently asked questions about cars and motorcycles
How do you remove the air filter leading to the engine on a Yamaha Xmax 125? Follow this guide to proceed with the replacement or cleaning. Position the scooter on the centre stand, and using a screwdriver, unscrew the perimeter screws that secure the air filter container (left side above the casing). After removing the securing screws from the container, uncover the cap and remove the air filter. Install a new one if damaged, or reposition the same filter after cleaning it (blow with air). Finally, close the air filter container and tighten the screws on the sides with the screwdriver.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Xmax 125 Today, let's discover the steps that will allow you to remove and replace the air filter of the engine on the Yamaha Xmax 125 scooter. First, place t…
Xmax 125 In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 125 scooter, a very simple and quick operation to perform every 12 month…
Xmax 125 In this tutorial, you will learn how to replace the drive belt on a Yamaha XMAX 125 scooter, a relatively simple task. First, wait for the engine to …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos