Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 07
Part: Headlight

In this tutorial, you will see how to replace the front headlamp on a Yamaha MT-07, a very simple and quick operation. First, ensure that the key is not inserted to operate safely. Next, locate the two side bolts indicated and remove them using an Allen key. Then, separate the headlamp from the base, disconnect all power connectors, and depending on the type of replacement used, transfer the old bulbs or fit the new mounting bracket. Reassemble everything by following the reverse procedure.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle and Replace the Front Headlamp and Bulb on a Yamaha MT-07
How to Dismantle and Replace the Front Headlamp and Bulb on a Yamaha MT-07
Mt 07 Here’s how to dismantle and replace the front headlamp and its bulb on a Yamaha MT-07. First, place the motorcycle on a stand and start unscrewing th…
Replacing the front headlight bulb on a Yamaha MT-07
Replacing the front headlight bulb on a Yamaha MT-07
Mt 07 In today's tutorial video, you will learn how to remove and replace the front headlight bulb on a Yamaha MT-07. First, unscrew the headlight mounting…
How to Replace the Air Filter on the Yamaha MT-07
How to Replace the Air Filter on the Yamaha MT-07
Mt 07 This guide will illustrate how to remove and replace the engine air filter on the Yamaha MT-07 motorcycle. First, place the motorcycle on its stand a…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos