Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Yamaha FZ6 Fazer?

Model: Yamaha Fz6 Fazer
Part: Brake pads

Video tutorial

In this tutorial, see how to replace the rear brake pads on a Yamaha FZ6 Fazer. This operation is very simple and quick if you have good manual skills.

First, position yourself in front of the brake in question. Then, using a 12 mm socket and a 14 mm socket, loosen the two bolts securing the caliper.

Next, unscrew the upper pin with an Allen key, completely remove the two bolts, and separate the caliper from the disc. At this point, remove the old pads, clean any dirt residues, and fit the new parts.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Change the Front Brake Pads on a Yamaha FZ6 Fazer
How to Change the Front Brake Pads on a Yamaha FZ6 Fazer
Fz6 Fazer In this brief and simple guide, learn how to remove and replace the front brake pads on a Yamaha FZ6 Fazer motorcycle. First, place the stand on your…
Guide to Replacing the Battery of the Yamaha FZ6 Fazer
Guide to Replacing the Battery of the Yamaha FZ6 Fazer
Fz6 Fazer Today, you will follow the guide and procedure necessary for removing and replacing the battery of the Yamaha FZ6 Fazer, as well as the base version …
Replacing Air Filter on Yamaha FZ6 Fazer
Replacing Air Filter on Yamaha FZ6 Fazer
Fz6 Fazer In this video, you will learn how to remove and replace the engine air filter on a Yamaha FZ6 Fazer, which is also valid for the FZ6. First, remove t…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos