Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Yamaha XSR 900?

Model: Yamaha Xsr 900
Part: Engine oil

Video tutorial

To change the engine oil on a Yamaha XSR 900, start by ensuring the bike is on a flat surface and stabilise the vehicle on a centre or side stand. First, position a container under the engine to collect the used oil. Remove the oil drain plug located at the bottom of the engine using an appropriate spanner.

Allow the oil to flow completely into the container. After draining, replace the drain plug and tighten it securely.

Now, locate the oil filler, which is usually near the top of the engine. Remove the filler cap and pour in the new engine oil through the filler tube.

Use a funnel to avoid spills. After adding the necessary amount, replace the filler cap and start the engine for a few minutes, allowing the oil to circulate.

Turn off the engine and check for leaks. Finally, ensure to dispose of the used oil in an environmentally friendly manner at authorised collection centres.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Yamaha XSR 900?
How to replace the engine oil in the Yamaha XSR 900?
Xsr 900 In this tutorial we can see how to replace the engine oil in the Yamaha XSR 900, a very simple and quick operation. First of all, make sure that the …
How to replace the engine oil in the Yamaha XSR 900?
How to replace the engine oil in the Yamaha XSR 900?
Xsr 900 In this tutorial we can see how to replace the engine oil in the Yamaha XSR 900, an extremely simple and fast operation. First of all, make sure that…
How to change the engine oil in the Yamaha XSR 900?
How to change the engine oil in the Yamaha XSR 900?
Xsr 900 Replacing the engine oil in the Yamaha XSR 900, as we can see in this tutorial, is an extremely simple and quick operation. First of all, let's make …

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos