Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Acura Rlx - Key

Acura Rlx (2014-2020 / KC2, KC1)
How to replace the remote control battery of the Acura RLX?
Replacing the Acura RLX remote control battery is a very simple and fast operation, let's see how to proceed in this tutorial. To do this, we will need a spare …read all…
Posted on 20 December 2022 by ScegliAuto
Acura Rlx (2014-2020 / KC2, KC1)
How to replace the battery in the remote control of the Acura RLX?
In this tutorial we can see how to replace the Acura RLX remote control battery, a very simple and economical operation. To do this, we will not need any …read all…
Posted on 17 July 2022 by ScegliAuto
Acura Rlx (2014-2020 / KC2, KC1)
How to replace the battery in the remote control of the Acura RLX?
In this tutorial we can see how to replace the Acura RLX remote control battery. For this quick and easy operation, we will need a small flat-tipped …read all…
Posted on 20 June 2022 by ScegliAuto
Acura Rlx (2014-2020 / KC2, KC1)
How to replace the Acura Rlx remote control battery
If we need to replace the battery of the remote control key of our car, we can find the instructions on how to behave in this description and in the video. …read all…
Posted on 28 May 2022 by ScegliAuto
Acura Rlx (2014-2020 / KC2, KC1)
How to change the key battery on the Acura Rlx
If we have noticed that we are no longer able to open the car doors with the remote control key, probably the battery of the latter has run out, let's see …read all…
Posted on 17 May 2024 by ScegliAuto
Acura Rlx (2014-2020 / KC2, KC1)
How do I replace the battery in the Acura RLX remote control?
In order to replace the battery of the Acura RLX remote control, you have to move the switch located on the back of the device, removing the chrome cover and …read all…
Posted on 26 April 2024 by ScegliAuto
Air conditioning (1) Car stereo (1) Battery (1) Key (6) -board computer (4) Checks and maintenance (2) Dashboard (1) Cabin air filter (1) Headlight bulb (1) Starter motor (1) Engine oil (1) Door panel (1) Brake pads (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos