Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Rlx
    4. : How do I replace the battery in the Acura RLX remote control?

Acura Rlx - Video tutorial

Model: Acura Rlx KC2, KC1 - Years 2014-2020
Part: Key
Operation: How do I replace the battery in the Acura RLX remote control?

In order to replace the battery of the Acura RLX remote control, you have to move the switch located on the back of the device, removing the chrome cover and the relative emergency key from the top. When these two parts have been removed, it will be possible to pry with a screwdriver inside the key housing, to open the remote control and access the battery. The latter can now be removed from its housing, replacing it with a new one; finally, the remote control must be closed again by inserting the key and the chrome.


Posted on 26 April 2024 by ScegliAuto



How to replace the battery in the remote control of the Acura RLX?
Acura Rlx (2014-2020 / KC2, KC1) In this tutorial we can see how to replace the Acura RLX remote control battery, a very simple and economical operation. To do this, we will not need
Replace the battery in the remote control of the Acura RLX - ILX key
Acura Rlx (2014-2020 / KC2, KC1) Let's see today in this short and simple guide, how to disassemble and replace the battery of the remote control of the key of the Acura RLX, but als
How to replace the battery in the remote control of the Acura RLX?
Acura Rlx (2014-2020 / KC2, KC1) In this tutorial we can see how to replace the Acura RLX remote control battery. For this quick and easy operation, we will need a small flat-tipped

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos