Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Acura RDX

Model: Acura Rdx MK 2 - Years 2013-2018
Part: Cabin air filter

To replace the cabin air filter, proceed as follows: access the cabin through the passenger side door, open the glove compartment located under the dashboard, remove the center shelf, and use your fingers to push inward to release the first filter cover, then detach the second cover. At this point, remove the filter and replace it with the new one (check that the filter specifications are suitable for your car model). Insert the new filter into the housing, ensuring the correct insertion direction (arrow pointing up). Finally, close the two covers, reattach the center shelf, and close the glove compartment.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Understand Fuse Diagrams in an Acura RDX
How to Understand Fuse Diagrams in an Acura RDX
Acura Rdx (2006-2012 / MK 1) The diagram for the fuse box located inside the cabin of an Acura RDX includes fuses for: fuel pump, ACG, ABS/VSA, heated seats, fog lights, driver’s…
How to Replace the Headlight Bulb on an Acura RDX
How to Replace the Headlight Bulb on an Acura RDX
Acura Rdx (2013-2018 / MK 2) To replace the headlight bulb on the Acura RDX, open the hood to access the components inside the engine compartment. Specifically, disconnect the co…
How to Replace the Battery on the Acura RDX?
How to Replace the Battery on the Acura RDX?
Acura Rdx (2013-2018 / MK 2) To replace the battery on the Acura RDX, open the hood to access the components inside the engine bay. The battery is located near the left front hea…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos