Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Acura
  4. :
  5. Rlx
  6. : How to install the Android Infotainment system on the Acura RLX

Acura Rlx - Video tutorial

Model: Acura Rlx KC2, KC1 - Years 2014-2020
Part: Car stereo
Operation: How to install the Android Infotainment system on the Acura RLX

Let's see in this guide the main instructions that will allow us to disassemble and replace the stock Infotainment system with an Android one on the Acura RLX. First we get on board the car and begin to disassemble the original multimedia system; to do this we remove all the plastic covers located on the sides, as shown in the video. Now unscrew all the fixing screws to extract the car radio, disconnecting the electrical wiring that we find on the back; then we install the new Android car stereo or compatible with Apple Car Play, following the video to the end!


Posted on 20 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos