Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on Acura TL

Model: Acura Acura Various
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin filter on an Acura TL by following a few simple steps: first, purchase a new cabin filter; next, get inside the vehicle, turn off the engine, and pull the handbrake. The cabin filter is located behind the glove compartment, so open the glove box and remove the side hook; unscrew the two screws and any fastening elements as shown in the video. Remove the white cover of the glove compartment. Take off the filter box cover and pull out the old filter. Position the new filter according to the instructions on the filter itself.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter on Acura MDX
How to Replace the Pollen Filter on Acura MDX
Acura Acura Various In this tutorial, you will see how to replace the pollen filter on an Acura MDX by following a few simple steps: first, purchase a new pollen filter;…
How to Replace the Oil Filter on Acura TSX
How to Replace the Oil Filter on Acura TSX
Acura Acura Various In this tutorial, you will see how to replace the oil filter on an Acura TSX by following some simple steps: first, purchase a new oil filter; next, …
Where to Find the Fuse Box on an Acura Vigor
Where to Find the Fuse Box on an Acura Vigor
Acura Acura Various To locate the fuse box in your Acura Vigor (1991-1994), follow the steps outlined in this guide. First, go inside the cabin and reach the driver's se…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos