Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Tlx
    4. : How to remove the rear lights in the Acura TLX?

Acura Tlx - Video tutorial

Model: Acura Tlx MK 5 - Years 2015-2020
Part: Tail light
Operation: How to remove the rear lights in the Acura TLX?

In this tutorial we can see how to disassemble the rear lights in the Acura TLX, a very simple and quick operation, to be carried out in case we need to replace a bulb or the entire element. First of all, make sure that the key is not inserted, then open the boot lid, disengage the two caps located on the inner edge of the headlight and, with an 8mm wrench, unscrew the two bolts inside them. Once this is done we can grab the light, pull it out and separate it from the body. Finally we disconnect the power connector and proceed with the replacement of the faulty element.


Posted on 3 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos