Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Sunshade from an Acura RDX?

Model: Acura Rdx MK 2 - Years 2013-2018
Part: Accessory kit

In this video, you can see how to remove a sunshade panel from a 2015 Acura RDX. The same procedure can be used for all vehicles of the same model produced between 2013 and 2018 because the removal mechanism is identical. Before starting, gather a small screwdriver and use it to press the pin located at the base of the sunshade installation. At the same time, rotate the sunshade as shown in the video to unlock it and remove it. Finally, disconnect the electrical connector.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Roof Railing on the Acura RDX
How to Install Roof Railing on the Acura RDX
Acura Rdx (2019-2026 / MK 3) In this video, you will learn how to install roof railing on the Acura RDX. Before proceeding with the installation, make sure you have purchased the…
How to Replace the Headlight Bulb on an Acura RDX
How to Replace the Headlight Bulb on an Acura RDX
Acura Rdx (2013-2018 / MK 2) To replace the headlight bulb on the Acura RDX, open the hood to access the components inside the engine compartment. Specifically, disconnect the co…
How to Replace the Battery in an Acura RDX?
How to Replace the Battery in an Acura RDX?
Acura Rdx (2013-2018 / MK 2) To replace the battery in an Acura RDX, open the hood and locate the battery inside the engine compartment, between the air filter box and the left h…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos