Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 147
  6. : Windshield washer nozzle

Alfa Romeo 147 - Windshield washer nozzle

Windshield Washer Nozzle Alfa Romeo 147 (2000-2010 / mk 1)

Alfa Romeo 147 (2000-2010 / MK 1)
How to Repair the Windscreen Washer Fluid Tube on an Alfa Romeo 147

Before starting, you will need a small pipe connector, and then open the bonnet of your Alfa Romeo 147 to access the windscreen washer fluid tube. Begin by …Read all…
Posted on 5 May 2026 by ScegliAuto

Alternator (2) Speaker (2) Shocks (1) Antenna (2) Car stereo (4) Battery (1) Air vents (1) Control arm (3) Transmission (2) Spark plugs (6) Glow plugs (3) Glove compartment (2) Snow chains (1) Control unit (1) Key (3) Timing belt (4) A/C controls (2) Checks and maintenance (12) Throttle body (1) Dashboard (3) Shifter boot (1) Bearing (2) MAF sensor (1) Brake rotors (1) Headlight (3) Tail light (1) Air filter (9) Cabin air filter (5) Diesel fuel filter (5) Oil filter (2) Parking brake (3) Clutch (3) Fuel injectors (2) Accessory kit (1) Light bulb (6) Headlight bulb (3) Tail light bulb (1) Interior dome light bulb (3) Instrument panel light (2) License plate light (1) Handle (8) Exhaust muffler (1) Starter motor (2) Transmission fluid (2) Engine oil (1) Clock (2) Door trim panel (13) Windshield (1) Front bumper (3) Shift knob (3) Pump (2) Fuel pump (3) Car door (1) Push button (1) Power window switch (3) Instrument cluster (5) Heater core (1) Fuse box (12) Seat (2) Axle shaft (3) Door lock (2) Suspension system (2) Side mirror (1) Service warning light (2) Windshield wipers (3) Thermostat (3) Turbocharger (1) Windshield washer nozzle (1) Valve (1) EGR valve (7) Blower motor (3) Steering wheel (4)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos