Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Air vents

Alfa Romeo 147 - Air vents

Air Vents Alfa Romeo 147 (2000-2010 / mk 1)

Alfa Romeo 147 (2000-2010 / MK 1)
How to Remove the Central Air Vent Panel on the Alfa Romeo GT 147
In this new mini guide, you will learn a quick and simple method to remove the entire central air vent panel of your Alfa Romeo GT 147. Before discovering how …Read all…
Posted on 29 June 2026 by ScegliAuto
Alternator (2) Speaker (2) Shocks (1) Antenna (2) Car stereo (4) Battery (1) Air vents (1) Control arm (3) Transmission (2) Spark plugs (5) Glow plugs (3) Glove compartment (2) Snow chains (1) Control unit (1) Key (3) Timing belt (4) A/C controls (2) Checks and maintenance (12) Throttle body (1) Dashboard (3) Shifter boot (1) Bearing (2) MAF sensor (1) Brake rotors (1) Headlight (3) Tail light (1) Air filter (9) Cabin air filter (5) Diesel fuel filter (5) Oil filter (2) Parking brake (3) Clutch (3) Fuel injectors (2) Accessory kit (1) Light bulb (6) Headlight bulb (3) Tail light bulb (1) Interior dome light bulb (3) Instrument panel light (2) License plate light (1) Handle (7) Exhaust muffler (1) Starter motor (2) Transmission fluid (2) Engine oil (1) Clock (2) Door trim panel (13) Windshield (1) Front bumper (3) Shift knob (3) Pump (2) Fuel pump (3) Car door (1) Push button (1) Power window switch (3) Instrument cluster (5) Heater core (1) Fuse box (12) Seat (2) Axle shaft (3) Door lock (2) Suspension system (2) Side mirror (1) Service warning light (2) Windshield wipers (3) Thermostat (3) Turbocharger (1) Windshield washer nozzle (1) Valve (1) EGR valve (7) Blower motor (3) Steering wheel (4)

What Could Cause the Smart Instrument Cluster to Show Three Lines

When the instrument cluster of the Smart shows three lines, it indicates that there are issues with the gearbox and it cannot engage; otherwise, an "N" would appear. To diagnose the problem, you need to obtain an OBDII reader, which can easily be found on any e-commerce platform for a few pounds. The most common cause of failure is damaged wiring from the controller to the gearbox engine connector. These wires may touch the intercooler housing, leading to abrasions, possibly a frayed wire. The video also shows wires touching each other, which can create issues; there may be a damaged sensor, or the problem could be with the gearbox motor. Often, it is the moisture that damages the wiring.

Watch the video!


by ScegliAuto

More videos