Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Windshield

Alfa Romeo 147 - Windshield

Windshield Alfa Romeo 147 (2000-2010 / mk 1)

Alfa Romeo 147 (2000-2010 / MK 1)
How to Replace the Windscreen on the Alfa Romeo 147
To change the windscreen on the Alfa Romeo 147, you need to go to an authorised centre, which will carry out this procedure. First, locate the appropriate …Read all…
Posted on 24 August 2026 by ScegliAuto
Alternator (2) Speaker (2) Shocks (1) Antenna (2) Car stereo (4) Battery (1) Air vents (1) Control arm (3) Transmission (2) Spark plugs (6) Glow plugs (3) Glove compartment (2) Snow chains (1) Control unit (1) Key (3) Timing belt (4) A/C controls (2) Checks and maintenance (12) Throttle body (1) Dashboard (3) Shifter boot (1) Bearing (2) MAF sensor (1) Brake rotors (1) Headlight (3) Tail light (1) Air filter (9) Cabin air filter (5) Diesel fuel filter (5) Oil filter (2) Parking brake (3) Clutch (3) Fuel injectors (2) Accessory kit (1) Light bulb (6) Headlight bulb (3) Tail light bulb (1) Interior dome light bulb (3) Instrument panel light (2) License plate light (1) Handle (8) Exhaust muffler (1) Starter motor (2) Transmission fluid (2) Engine oil (1) Clock (2) Door trim panel (13) Windshield (1) Front bumper (3) Shift knob (3) Pump (2) Fuel pump (3) Car door (1) Push button (1) Power window switch (3) Instrument cluster (5) Heater core (1) Fuse box (12) Seat (2) Axle shaft (3) Door lock (2) Suspension system (2) Side mirror (1) Service warning light (2) Windshield wipers (3) Thermostat (3) Turbocharger (1) Windshield washer nozzle (1) Valve (1) EGR valve (7) Blower motor (3) Steering wheel (4)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos