Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 147
  6. : Side mirror

Alfa Romeo 147 - Side mirror

Side Mirror Alfa Romeo 147 (2000-2010 / mk 1)

Alfa Romeo 147 (2000-2010 / MK 1)
Removing the Rear View Mirror on Alfa Romeo 147

Is the rear view mirror of your car damaged? Here’s how to remove it. Using a plastic lever, pry between the perimeter of the mirror frame and the mirror …Read all…
Posted on 7 April 2026 by ScegliAuto

Alternator (2) Speaker (2) Shocks (1) Antenna (2) Car stereo (4) Battery (1) Air vents (1) Control arm (3) Transmission (2) Spark plugs (5) Glow plugs (3) Glove compartment (2) Snow chains (1) Control unit (1) Key (3) Timing belt (4) A/C controls (2) Checks and maintenance (12) Throttle body (1) Dashboard (3) Shifter boot (1) Bearing (2) MAF sensor (1) Brake rotors (1) Headlight (3) Tail light (1) Air filter (9) Cabin air filter (5) Diesel fuel filter (5) Oil filter (2) Parking brake (3) Clutch (3) Fuel injectors (2) Accessory kit (1) Light bulb (6) Headlight bulb (3) Tail light bulb (1) Interior dome light bulb (3) Instrument panel light (2) License plate light (1) Handle (7) Exhaust muffler (1) Starter motor (2) Transmission fluid (2) Engine oil (1) Clock (2) Door trim panel (13) Windshield (1) Front bumper (3) Shift knob (3) Pump (2) Fuel pump (3) Car door (1) Push button (1) Power window switch (3) Instrument cluster (5) Heater core (1) Fuse box (12) Seat (2) Axle shaft (3) Door lock (2) Suspension system (2) Side mirror (1) Service warning light (2) Windshield wipers (3) Thermostat (3) Turbocharger (1) Windshield washer nozzle (1) Valve (1) EGR valve (7) Blower motor (3) Steering wheel (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos