|
Do it yourself
| |||
| ||||
How to Replace the Wheel Centre Badge of the Alfa Romeo Mito
Model: Alfa Romeo Mito
MK 1
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
Replacing the wheel centre badge of the Alfa Romeo Mito is a simple and quick task that you can do yourself. To perform this operation, you will need a flathead screwdriver and a cloth. Wrap the cloth around the tip of the screwdriver and insert it at the edge of the badge to apply gentle pressure, allowing you to remove it. After removing the badge, proceed to insert the new badge. Take the new badge and position it into the holes of the previous one. If you want to keep the support but change the design of the badge, you can remove the old badge using a heat gun to soften the adhesive, making it easier to remove and allowing you to stick the new one in its place.
Updated on 3 November 2026 by ScegliAuto
Related tutorials
Alfa Romeo Mito
(2008-2018 /
MK 1)
The YouTuber who created this video demonstrates how to replace the badge, which is the manufacturer's emblem on an Alfa Romeo Mito (the tutorial is …
Alfa Romeo Mito
(2008-2018 /
MK 1)
In this video, you will see how to remove and replace the front badge or logo of the manufacturer, which also applies to the rear, on the Alfa Romeo …
Alfa Romeo Mito
(2008-2018 /
MK 1)
In this video, see how to remove the rear badge from the Alfa Romeo Mito. Often, rain and exposure to the elements damage the rear badge, which can e…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Hyundai i20
These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |