Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : How to remove the door sill on Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Accessory Kit
Operation: How to remove the door sill on Alfa Romeo Mito

Let's see in this video how to remove the door sill on Alfa Romeo Mito. With a lever, remove the gasket that flanks the door sill around the front right door. Again with the lever we open the plastic covering placed on the sheet where the power cables pass. With the help of a tube, we pass the cables necessary for our end, let them slide under the plastic in the sheet. We reassemble the sill on the door profile. We press the door sill until the plastic clips engage. Finally we reassemble the gasket removed previously.


Posted on 12 October 2023 by ScegliAuto



Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to locate the precise locations of the fuses on your Alfa Romeo Mi
How do you remove the door panel of the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To be able to remove the door panel of the Alfa Romeo MiTo you have to remove the triangular cover in correspondence with the external rear-view mirr
How do you remove the external handle of the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) In order to remove the external handle of the Alfa Romeo MiTo, you have to open the door itself so that you can remove the circular cover on the side

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos