|
Do it yourself
| |||
| ||||
How to replace the fuel filter of the Alfa Romeo Giulietta
Model: Alfa Romeo Giulietta
MK 1
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Video tutorial
In this video, we see how to change the diesel filter on an Alfa Romeo Giulietta: the filter is located in the engine compartment and is clearly visible, you will need a 10mm wrench to loosen the bracket screw, then remove the two connectors on the filter cap: one of them is metal and needs to be pressed forward and then pulled up. The other one is rubber, it needs to be pressed firmly on the sides and then pulled up, and at this point the filter must be detached only from below, from the sensor connector. It is advisable to have a container on hand to recover the diesel contained in the filter. We can find the new filter for example on E-Bay with the code 274159488971 at the price of 24.99 euros, free delivery. The YouTuber has the excellent habit of writing the date of the change and the mileage at which he did the work, which is highly advisable. Put the gasket and the sensor in the lower part and connect it, then reattach the upper connectors and close the bracket. Operation completed.
Posted on 26 May 2025 by ScegliAuto
Related tutorials
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
To replace the diesel filter on an Alfa Romeo Giulietta diesel, turn off the engine and open the bonnet. Locate the filter assembly in the engine bay…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
In this video tutorial, you can see how to replace the diesel filter on an Alfa Romeo Giulietta by following a few simple steps: first, purchase a ne…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…
Other guides you may be interested in
|
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |