Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on an Alfa Romeo Giulietta?

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Diesel fuel filter

Video tutorial

In this video tutorial, you can see how to replace the diesel filter on an Alfa Romeo Giulietta by following a few simple steps: first, purchase a new diesel filter. Next, lift the bonnet and secure it with the appropriate prop.

Lift the yellow tab and slide the grey part to the right, as it will not come off under pressure and you could damage the electrical connector. The hoses connected to the diesel filter have two orange safety tabs on top and two white ones underneath; the larger one goes on the right spout under the orange tab, while the smaller one goes on the left under the orange tab. Remove the Torx bolts and then remove the two securing screws.

Take out the old diesel filter and position the new filter in place. Reassemble all parts in reverse order.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on an Alfa Romeo Giulietta?
How to Replace the Fuel Filter on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the fuel filter on an Alfa Romeo Giulietta, open the bonnet to access the engine bay: the filter is located just in front of the tank cont…
How to Replace the Air Filter of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…
How to replace the diesel filter in an Alfa Romeo Giulietta
How to replace the diesel filter in an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the diesel filter on an Alfa Romeo Giulietta diesel, turn off the engine and open the bonnet. Locate the filter assembly in the engine bay…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos