Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adjusting the Handbrake on Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

Video tutorial

In today's video, you will learn how to adjust the handbrake on an Alfa Romeo 147, which also applies to most cars with a manual handbrake. First, remove the handbrake cover as shown in the video.

Then, using a spanner, loosen the nut of the handbrake. Lift the handbrake one click if it is too loose, and then tighten the bolt again.

Check its operation, and if necessary, tighten it well and refit the cover by simply clipping it back on, completing your task!


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Button on the Alfa Romeo 147?
How to Replace the Brake Button on the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) This video shows how to replace the handbrake lever button. The car used for this clip is an Alfa Romeo 147, but the same procedure applies to the Al…
How to Replace the Handbrake Cable on the Alfa Romeo 147?
How to Replace the Handbrake Cable on the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) To replace the handbrake cable on the Alfa Romeo 147, lift the handbrake lever so that you can detach the gaiter that surrounds it. Under this gaiter…
How to Remove the Front Bumper from an Alfa Romeo 147
How to Remove the Front Bumper from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by unscrewing and removing all screws and bolts that secure the front bumper to the ch…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos