Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from an Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Car stereo

Before you can start, sit in the front passenger seat of your Alfa Romeo Giulietta. First, open the glove compartment and remove the upper cap using a flathead screwdriver as a lever. This will reveal the screw that secures the dashboard insert, which you need to unscrew and remove. Once this step is complete, you will have freed the insert, which you must unclip and remove. After removing the insert, you will see the Torx screws that secure the radio. Proceed to unscrew and remove these screws, thus freeing the radio. At this point, slide the radio out of its housing, then disconnect the rear connectors, and you will have finished the removal.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Today, you will learn how to remove and replace the standard radio in an Alfa Romeo Giulietta by following the instructions below. First, get in the …
How to Replace the Standard Radio of the Alfa Romeo Giulietta
How to Replace the Standard Radio of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This guide shows how to remove and replace the standard radio with a 2Din unit in the Alfa Romeo Giulietta, following the instructions below. First, …
Removing the Stereo from an Alfa Romeo Giulietta
Removing the Stereo from an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Remove the stereo from an Alfa Romeo Giulietta. Use a plastic lever to detach the trim around the stereo (where the air vents are located) from the c…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos