Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Headlining on Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020

First, remove the side seals of the doors and the rear hatch simply by pulling them by hand. As shown in the video, unclip the supports of the sun visors and unscrew them. To remove the front interior light, simply pull it out with a plastic lever (not metal!) and disconnect the connectors. The upper light must be separated from its frame (which can remain on the headlining). Remove the upper handles using a T25 torx key. Using a plastic lever, remove the clips securing the headlining and the tabs above the doors, then remove the headlining.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Sunroof of the Alfa Romeo Giulietta
How to Reset the Sunroof of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video, see how to force close the sunroof of the Alfa Romeo Giulietta. This operation may be necessary if the closing mechanism gets stuck…
How to Replace the Interior Light Bulb of the Alfa Romeo Giulietta
How to Replace the Interior Light Bulb of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the interior light bulb of the Alfa Romeo Giulietta, lever the light fitting to detach it from the central roof area. Once removed from it…
Removing the Stereo from an Alfa Romeo Giulietta
Removing the Stereo from an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Remove the stereo from an Alfa Romeo Giulietta. Use a plastic lever to detach the trim around the stereo (where the air vents are located) from the c…

Other guides you may be interested in

    Frequently Asked Questions

    • Giulietta 2010-2020 - How many kilometers should the Alfa Romeo Giulietta be serviced? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos