Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing fuses on an Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Fuse box

Let's see how to replace the fuses on an Alfa Romeo 159. The car fuses are located inside the cabin, let's find out where. Use a plastic lever to remove the trim located in the dashboard next to the steering wheel, then locate the fuse box. Use needle-nose pliers to pull out the damaged fuses from the compartment. Once this is done, insert the new fuses into their respective slots in the compartment. After replacing, close the fuse inspection box with the cover. Test the correct functioning of the car by turning on the instrument panel: check the electrical components related to the car's operation.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box on the Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) If you do not yet know where the fuse box is located in your Alfa Romeo 159, read this mini guide carefully and follow the instructions. First, enter…
Fuse Box of the Alfa Romeo 159
Fuse Box of the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) The fuse box of the Alfa Romeo 159 is located in the cabin. Once inside the vehicle, carefully remove the panel situated at the bottom left of the st…
How to Remove the Rear Light of an Alfa Romeo 159
How to Remove the Rear Light of an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Before you can start, open the tailgate of the boot on your Alfa Romeo 159. Begin by moving the carpet that covers the fixing nuts of the rear light.…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos