Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Fuse Boxes on the Alfa Romeo 159?

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

Video tutorial

Today, we will explain how to replace the fuse box of the Alfa Romeo 159. The Alfa Romeo 159 has a fuse box located under the bonnet; in case of failure, it is possible to replace the entire box instead of just a relay. Inside the fuse box, you will find the fuses and relays, which are fuses with a higher amperage.

To remove the fuse box, use a 20 mm socket wrench. Unscrew the nut to lift the box from its position.

Disconnect the connector from the fuse box to extract it from its place. To install a new box or base, connect the connector and then screw the bolt at the base.

This operation requires disconnecting the battery.


Posted on 1 April 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Alfa Romeo 159?
Where are the fuses located in the Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) Any fuse in the Alfa Romeo 159 is located inside one of the dedicated fuse boxes present in the vehicle: in this type of vehicle, you will find two b…
What is the Fuse Diagram for the Alfa Romeo 159?
What is the Fuse Diagram for the Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) In this video, you can see where the fuse boxes of the Alfa Romeo 159 are located and their respective diagrams, useful in case you need to check the…
Fuse Box Locations for the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) The fuse boxes for the Alfa Romeo 159 are located in two different places; the first fuse box is inside the cabin, while the second is under the fron…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos