Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handbrake Cable on the Alfa Romeo 156

Model: Alfa Romeo 156 MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

Video tutorial

Today, follow these main instructions to remove and replace the handbrake cable on the Alfa Romeo 156. First, get inside the vehicle and start by removing the handbrake gaiter to fully unscrew the handbrake cable adjustment nut, as shown in the video.

Next, lift the vehicle and disconnect the cables from the rear wheel brakes; then unclip the wires from the guides and remove the cable along with the housings.

Finally, replace and refit everything, following the video until the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Shift Cable on the Alfa Romeo 156 1.8 TS
How to Replace the Gear Shift Cable on the Alfa Romeo 156 1.8 TS
Alfa Romeo 156 (1997-2007 / MK 1) This video shows the main steps to remove and replace the gear shift cable on the Alfa Romeo 156 1.8 Twin Spark. First, open the bonnet and start by …
How to Replace the Key Battery in an Alfa Romeo 156
How to Replace the Key Battery in an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) If you own an Alfa Romeo 156 and want to learn how to replace the button battery inside the key, simply read the following guide carefully. First, yo…
How to Replace the Coolant Reservoir of an Alfa Romeo 156
How to Replace the Coolant Reservoir of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This procedure must be carried out with the engine off. Start by opening the front bonnet of your Alfa Romeo 156. Next, position a container undernea…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos