Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bumper and Rear Dam of the Alfa Romeo Giulietta?

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Rear bumper

To remove the bumper of the Alfa Romeo Giulietta, loosen the screws located inside the wheel arches. Next, loosen the screws securing the rear lights, removing them by opening the clips located underneath. At this point, you can also remove the last screws located at the top and bottom of the bumper and detach it. Once removed, leverage to detach the dam by opening all its securing clips with a screwdriver. Then, install the new dam onto the bumper and remount the bumper onto the rear of the car.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Rear Dam on an Alfa Romeo Giulietta?
How to Install the Rear Dam on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To install the rear dam on the Alfa Romeo Giulietta, loosen the screws securing the bumper and remove it, disconnecting the connectors as well. Once …
How to Remove the Front Bumper from an Alfa Romeo Giulietta?
How to Remove the Front Bumper from an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the front bumper on an Alfa Romeo Giulietta, lift the bonnet and unscrew all the screws located at the top of the bumper, which were previ…
How to Remove the Front Bumper on an Alfa Romeo Giulietta?
How to Remove the Front Bumper on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) In this tutorial, see how to remove the front bumper on an Alfa Romeo Giulietta, a very simple and quick operation. First, open the bonnet, then loca…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos