Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Rear bumper

Video tutorial

Today we will explain how to remove the rear bumper of the Alfa Romeo Giulietta. We start the disassembly of the bumper by opening the trunk and unscrewing the side screws of the fender; after removing the screws we unscrew the side nuts of the headlights in order to remove them and disconnect the connector.

We then proceed using a t - twenty socket wrench to unscrew the lower bumper pins. After removing the pins, we carefully remove the fender starting from the side and then remove the central part, being careful not to damage the plastic clips.

Disconnect the connector to completely remove the headlight.


Posted on 22 September 2025 by ScegliAuto


Related tutorials

How to Install the Rear Dam on an Alfa Romeo Giulietta?
How to Install the Rear Dam on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To install the rear dam on the Alfa Romeo Giulietta, loosen the screws securing the bumper and remove it, disconnecting the connectors as well. Once …
How to Replace the Bumper and Rear Dam of the Alfa Romeo Giulietta?
How to Replace the Bumper and Rear Dam of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To remove the bumper of the Alfa Romeo Giulietta, loosen the screws located inside the wheel arches. Next, loosen the screws securing the rear lights…
Replace the Front Bumper Grille on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This video provides instructions for removing and replacing the grille or central mesh of the front bumper on the Alfa Romeo Giulietta in simple step…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos