Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Rear Dam on an Alfa Romeo Giulietta?

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

Video tutorial

To install the rear dam on the Alfa Romeo Giulietta, loosen the screws securing the bumper and remove it, disconnecting the connectors as well. Once removed, take out the screws located at the bottom to detach the black cover from the lower part of the bumper.

The dam should be mounted in its place, using additional holes drilled with a power drill and securing it with sealant. After completing the operation, reinstall the bumper equipped with the dam at the rear of the vehicle.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace the Bumper and Rear Dam of the Alfa Romeo Giulietta?
How to Replace the Bumper and Rear Dam of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To remove the bumper of the Alfa Romeo Giulietta, loosen the screws located inside the wheel arches. Next, loosen the screws securing the rear lights…
Removing the Dashboard Air Vent Diffuser on an Alfa Romeo Giulietta
Removing the Dashboard Air Vent Diffuser on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This guide will show you the procedure necessary to remove and replace the air vents on the dashboard of an Alfa Romeo Giulietta. First, get inside t…
How to Set the Time on an Alfa Romeo Giulietta
How to Set the Time on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before you can start, sit in the driver's seat of your Alfa Romeo Giulietta. First, activate the instrument cluster, then press the "Set" button. Nex…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos