Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

Video tutorial

In today's video tutorial, you will see how to reset the maintenance light for the oil change on the Alfa Romeo 159, as well as on all other models from the manufacturer. To perform the reset, you will need a diagnostic tool; connect the computer to the OBD port of your car, selecting the make, model, and engine type, as shown in the video.

Next, navigate to the oil light reset option, following the procedure indicated for the reset; all that remains is to check on the instrument cluster that the light has been reset!


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Reset Service Light on Alfa Romeo 159
Reset Service Light on Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In today's video, you will learn how to reset the maintenance light for the oil change on an Alfa Romeo 159, following the instructions below. First,…
How to Reset the Service Light on an Alfa Romeo 159?
How to Reset the Service Light on an Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) To reset the service light on an Alfa Romeo 159, insert the ignition key into the ignition switch, turning it to power on the dashboard and check tha…
How to Reset the Service Light on an Alfa Romeo 159
How to Reset the Service Light on an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) To reset the service light related to the service interval of an Alfa Romeo 159, turn on the vehicle's instrument cluster and press the Menu button o…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos