Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Alfa Romeo 159?

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

Video tutorial

To reset the service light on an Alfa Romeo 159, insert the ignition key into the ignition switch, turning it to power on the dashboard and check that the light is active. Next, connect an OBD scanner to the corresponding socket located under the steering column.

Following the instructions provided in the video, select the model and version of the car. This will allow you to reset the service light, which you can verify by turning the dashboard off and on again.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

Reset Service Light on Alfa Romeo 159
Reset Service Light on Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In today's video, you will learn how to reset the maintenance light for the oil change on an Alfa Romeo 159, following the instructions below. First,…
How to Reset the Service Light on an Alfa Romeo 159
How to Reset the Service Light on an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) To reset the service light related to the service interval of an Alfa Romeo 159, turn on the vehicle's instrument cluster and press the Menu button o…
How to Reset the Engine Oil Light on the Alfa Romeo 159 - Brera
How to Reset the Engine Oil Light on the Alfa Romeo 159 - Brera
Alfa Romeo 159 (2005-2011 / MK 1) Today, you will discover the steps to reset the service light for routine maintenance of the oil change on the Alfa Romeo 159, as well as on the Brer…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos