Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Shell and Battery of the Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Key

Next, we will see the steps to disassemble and replace the shell and battery of the key for the Alfa Romeo 159. First, take your remote control and start by removing the physical key from inside it; then, pry the sides of the shells to open the remote into two parts, as shown in the video. At this point, remove the battery and circuit board, transferring everything to the new key shell; securely fit your components into their designated spaces, and finally check the functionality of all buttons!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Key Shell on an Alfa Romeo 159?
How to Replace the Remote Key Shell on an Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) This tutorial shows how to replace the remote key shell on an Alfa Romeo 159. You will need a small flathead screwdriver, a crosshead screwdriver, an…
How to replace the engine oil and oil filter of the Alfa Romeo 159 1.9 JTDm
How to replace the engine oil and oil filter of the Alfa Romeo 159 1.9 JTDm
Alfa Romeo 159 (2005-2011 / MK 1) Today we will see the instructions that will allow us to carry out the ordinary maintenance service, replacing the engine oil and oil filter, of the …
How to Remove the Rear Light of an Alfa Romeo 159
How to Remove the Rear Light of an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Before you can start, open the tailgate of the boot on your Alfa Romeo 159. Begin by moving the carpet that covers the fixing nuts of the rear light.…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos