Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on an Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

The illuminated service light means your vehicle needs attention. Turning off the light mechanically without performing the required service tasks can seriously jeopardize your safety and that of others.

To reset the service light, close all four doors and turn the key to position 1 using the electronic key on the left side of the steering wheel. All lights on the dashboard will illuminate.

Press the gas pedal and then press the brake pedal four times. On the fifth press, hold it down for 10 seconds.

Release both pedals simultaneously, and the light will turn off.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Today, you will see, thanks to this very useful video guide, the entire step-by-step procedure to reset the service light on an Alfa Romeo Stelvio. T…
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this brief guide, we will see how to service the brakes and reset the warning light on the Alfa Romeo Stelvio, as well as the Giulia. First, get i…
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this brief guide, you will find instructions on how to perform routine maintenance and reset the engine oil light on the Alfa Romeo Stelvio, as we…

Other guides you may be interested in

    Frequently Asked Questions

    • Alfa Romeo Stelvio 2016-2024 - How do you reset the Alfa Romeo Stelvio Service warning light? Read answer

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos