Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : How to replace the instrument panel light on the Alfa Romeo Giulietta

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Dashboard light
Operation: How to replace the instrument panel light on the Alfa Romeo Giulietta

In today's video tutorial we will see the main instructions that will allow us to disassemble and replace the dashboard instrument cluster lights of the Alfa Romeo Giulietta. First we get on board the car and start by removing the central plastic of the dashboard; then let's unscrew the fixing screws of the instrument panel, as shown in the video. At this point we remove the panel, disconnecting the electrical connectors on the back; now let's remove the plastic cover of the instrumentation to access the light bulbs in the panel. Let's replace them with new ones, reassembling everything!


Posted on 25 June 2022 by ScegliAuto



How to set the time of an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before we can start, we will have to go and sit in the driver's seat of our Alfa Romeo Giulietta. So let's start by activating the instrument panel,
How do you reset the Service light on the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) The procedure for resetting the Service light on the Alfa Romeo Giulietta is done by turning on the instrument panel and then connecting a diagnostic
How to reset the oil change light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, we will have to sit on the driver's seat of our Alfa Romeo Giulietta. So let's start by inserting and turning the key in the ignitio

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos