Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Lights on the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: License plate light

Video tutorial

This excellent video is brief but very informative, explaining with figures all the steps to replace the number plate lights on the Alfa Romeo Giulietta. Start by removing the number plate light units, then turn the bulb holder clockwise and extract the burnt-out bulb for replacement.

A very important point to pay attention to is the type of bulb to use; for the Alfa Romeo Giulietta, it is a W5W type bulb rated at 5 watts. This bulb specification is also available in the vehicle's maintenance manual.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Lights on the Alfa Romeo Giulietta
How to Replace the Number Plate Lights on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's tutorial, you will learn how to remove and replace the number plate lights on the Alfa Romeo Giulietta, following the instructions below. …
Replacing the Number Plate Lights on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial, we will show you how to replace the number plate lights on an Alfa Romeo Giulietta with a simple and quick procedure. First, …
How to Replace the Number Plate Light Bulb on an Alfa Romeo Giulietta
How to Replace the Number Plate Light Bulb on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the number plate light bulb on an Alfa Romeo Giulietta, you will need a flathead screwdriver. Insert a thin screwdriver into the side of t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos