Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 159
  6. : How to remove the internal door handle of the Alfa Romeo 159

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Handle
Operation: How to remove the internal door handle of the Alfa Romeo 159

In this video tutorial we will see how to remove and replace the internal handle of the front door of the Alfa Romeo 159. First we open the front door and start with the disassembly of the door panel, unscrewing all the screws; after which we also disassemble the window lifter push-button panel, unscrewing the screws located inside the handle and disconnecting the electrical connector below, as shown in the video. Once the door panel has been removed, we can unscrew the screws of the interior handle, disconnecting the cable; let's remove it and replace it with the new one!


Posted on 24 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos