Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel from Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Door trim panel

In this video tutorial, you will learn how to remove the rear door panel of an Alfa Romeo 159. First, open the door and remove the screw cover found in the grab handle, then unscrew the screw underneath; next, remove the screw from the opening handle and all other screws present on the sides of the door. At this point, pry out the window switch and the two bolts located underneath; now you can extract the door panel by disengaging it and pulling it towards you, disconnecting the handle cable.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Alfa Romeo 159 located?
Where is the OBD port of the Alfa Romeo 159 located?
Alfa Romeo 159 (2005-2011 / MK 1) In the following guide aimed at all of you who own an Alfa Romeo 159, we will explain how you can access the OBD port. First of all, open the driver'…
How to Remove the Rear Light of an Alfa Romeo 159
How to Remove the Rear Light of an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Before you can start, open the tailgate of the boot on your Alfa Romeo 159. Begin by moving the carpet that covers the fixing nuts of the rear light.…
How to Remove the Door Panel on an Alfa Romeo 159
How to Remove the Door Panel on an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) How to remove the door panel on an Alfa Romeo 159? In this video, learn how to proceed: before starting the disassembly work, disconnect the battery …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos