Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : How to manually change the time of the Alfa Romeo 159

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Instrument cluster
Operation: How to manually change the time of the Alfa Romeo 159

If you see an incorrect time on the dashboard of your Alfa Romeo 159 and want to find out how to change it manually, just put these simple steps into practice. First, insert the key and start the ignition. Then press the "Menu" button located on the left-hand stalk switch once and use the "+" and "-" buttons to manually change the hour and minute digits. Once this is done, wait a few moments and the changes just made will be saved automatically. All that remains is to exit the menu and switch off the instrument panel.


Posted on 3 December 2022 by ScegliAuto

    Frequently Asked Questions

    • 159 2005-2011 - Why does the ASR not available light turn on in the Alfa 159? Read Answer
    • 159 2005-2011 - Why doesn't the Hill Holder system activate on the Alfa romeo 159? Read Answer
    • 159 2005-2011 - What does the VDC warning light on the Alfa Romeo 159 mean? Read Answer
    • 159 2005-2011 - Why does the engine oil warning light come on on the Alfa Romeo 159? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos